Search results for "Optical characterization"
showing 10 items of 15 documents
Optical characterization of nanowires for optoelectronic devices and energy harvesting
2019
This thesis presents a detailed investigation of the optical properties of Bi2Te3, GaN, InN, InP and GaN/AlN nanowires grown by different techniques for their application on future optoelectronic and thermoelectric devices. The thesis also includes a prototype of hybrid solar cell. The outline of the thesis is organized as follows: Chapter 1 presents a bird's eye view of the content of the thesis. Chapter 2 reviews basic notions of epitaxial growth, fundamentals in the synthesis of the nanowires and experimental techniques used for characterization and their underlying theory. Although several characterization techniques are employed in this work, Raman spectroscopy is applied as the major …
MBE growth and properties of low-density InAs/GaAs quantum dot structures.
2011
We present the results of a comprehensive study carried out on morphological, structural and optical properties of InAs/GaAs quantum dot structures grown by Molecular Beam Epitaxy. InAs quantum dots were deposited at low growth rate and high growth temperature and were capped with InGaAs upper confining layers. Owing to these particular design and growth parameters, quantum dot densities are in the order of 4-5x109 cm-2 with emission wavelengths ranging from 1.20 to 1.33 µm at 10 K, features that make these structures interesting for single-photon operation at telecom wavelength. High resolution structural techniques show that In content and composition profiles in the structures depend on …
Electro-optical characterization of ruthenium-based dye sensitized solar cells: A study of light soaking, ageing and temperature effects
2017
Abstract In this work, we report on the electro-optical characterization of Dye Sensitized Solar Cells (DSSCs) which use ruthenium complexes as sensitizers. In particular, several kinds of measurements have been performed to study the electrical performances and the efficiency levels of the cells at different operating conditions. In detail, the measurements have been conducted at varying temperatures and hours of light soaking. Our results show that the short circuit current density J SC , the open circuit voltage V OC and the conversion efficiency η increase with the hours of light soaking, while they decrease with temperature. A thorough investigation on the light soaking process at the …
One diode circuital model of light soaking phenomena in Dye-Sensitized Solar Cells
2018
Abstract In this work, we report on the modelling of light soaking effect on Ruthenium-based Dye Sensitized Solar cells (DSSCs). Such a phenomenon can be detected when exposing the cells at increasing hours of illumination and produces a reversible performance increase. Starting from the results obtained through the electro-optical characterization of the cells, we applied a one-diode circuital-model. Our results show a good agreement between the experimental and the simulated data, with a mean square error in the order of 10−12 and a maximum error in current lower than 0.6%. Finally such results allowed us to infer some precise trends followed by the cells main electrical parameters and of…
Fabrication and electro-optical characterization of Ruthenium-based Dye-Sensitized Solar Cells
2015
In this paper, we measure the main photoelectrical parameters of Dye Sensitized Solar Cells (DSSCs) based on ruthenium complexes at different irradiance levels, incident wavelengths, temperatures and hours of light soaking
Experimental characterization of Ruthenium-based Dye Sensitized Solar Cells and study of light-soaking effect impact on performance
2016
In this paper, we present an experimental investigation on the performance of Ruthenium-based Dye Sensitized Solar Cells (DSSCs) at different irradiance levels, incident wavelengths and hours of illumination. In particular, the measurements have been aimed at studying the performance variation due to light soaking effect since this phenomenon has noteworthy practical implications, such as stability tests of DSSCs. Our results show that the short circuit current density, the open circuit voltage and the conversion efficiency η increase with the hours of light soaking. Finally, the observed phenomenon is reversible, and thus the performance decreases again when the cell is kept in the dark.
Characterization of thin film CIG(S,SE)2 submodules using solar simulator and laser beam induced current techniques (Versione estesa)
2015
In this work, the electrical and optical characterization of CIG(S, Se)2 sub-modules using both a solar simulator equipment and the Laser Beam Induced Current (LBIC) technique is presented. By using the solar simulator and a proper set-up, the electrical parameters of the modules at varying irradiance and temperatures are determined. In addition, the LBIC measurements are carried out to analyze the 2D photocurrent uniformity of the modules at two different wavelengths. Dispersion values of extracted parameters can be very useful for practically tuning the modelling stage at device/module level.
Characterization of Thin Film CIG(S,Se)2 submodules using Laser Beam Induced Current Technique
2015
Nowadays, an important class of thin film solar cells consists of CuInGa(S,Se)2 (CIGSSe) solar cells, i.e., composed of Copper, Indium, Gallium, Sulfur and Selenide. Thanks to their electrical and optical properties and to the technological development, thin film integrated photovoltaic modules have nowadays obtained relatively good values of efficiency. In this work, we have performed the electrical and optical characterization of a CIGSSe sub-module by using both a solar simulator equipment and the Laser Beam Induced Current (LBIC) technique.
Stability improvement of PMMA and Lumogen® coatings for hybrid white LEDs
2014
Hybrid white LEDs employing perylene-based dyes for the frequency down-conversion of blue light, generated by a standard inorganic source, suffer from colour rendering variations due to the degradation of the organic molecule under prolonged irradiation. To avoid such inconvenient, proper encapsulation of the dyes in resins or other polymer matrices can prevent their accelerated ageing; nevertheless, embedding polymers can also exhibit significant bleaching caused by chemico-physical agents. Among all, polymethyl methacrilate (PMMA) is one of the most used materials for the fabrication of hybrid LEDs' colour conversion coatings, therefore its stability needs to be investigated.